Laser Fiber Optic Test Pen 5MW/10MW/20MW/30MW/50MW Both CATV Telecommunications Visual

• Type: Fiber Test Pen
• Wiring Devices: Test Sc FC St
• Certification: CE, ISO
• Condition: New
• Transport Package: Carton
• Specification: 1pcs/carton
• Model NO.: 20s
• Origin: China
• Production Capacity: 5000/Month

Product Description

Visual Fault Locator BOB-VFL650-2S
 
     This type VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical networks. It finds breakpoints, poor connections, bending or cracking in fiber optic cables; and it can find faults in an OTDR dead zone and is used for end-to-end visual fiber identification.  
Applications

1. Maintenance in telecom, CATV
2. Test Lab of optical fibers
3. Fiber routing and continuity checking in optical networks
4. Other fiber optic measurements

Features

1. 2.5mm universal connector,for 1.25mm connectors,

   FC(male)-LC(Female) adaptor also can be provided on request

1. Operates either in CW or Pulsed mode with constant

output power

1. Low battery warning
2. Long battery life (up to 60 hours)
3. Drop-resistant and dust-proof design of laser head
4. Laser case ground design prevents ESD damage
5. Portable and rugged
6. Easy to use

Product Description
    The Visual Fault Locator launches 650nm visible laser light into the fiber.
When the light encounters a break or sharp bend, it scatters, and the scattered
light can be observed emerging from the cable. The Visual Fault Locator can
locates breaks in short patchcords, which an OTDR cannot detect due to their
operating dead zone. A fault locator is also much cheaper than an OTDR.
However, they are not recommended for using with dark-colored or armored
cables.
The Visual Fault Locator can be operated in either continuous wave
mode (CW mode) or in pulsed mode. Pulsed mode aids in locating faults under
high ambient light conditions and improve battery life. It also could be used in
checking connector quality. Often a connector may appears to be perfect. But
inside the connector ferrule itself, poor gluing or dirty may create a microbend
in the fiber. This microbend will produce excess insertion losses or return losses,  
and may result in premature failure of the connector. As the visual light launches
through the fiber, it emerges from the connector in question, one can readily see
the distortion as a series of rings superimposed on a normal output. Bending or
twisting the fiber may affect the overall intensity pattern, but not the ring pattern
itself.
Specification

Model	VFL650-2S
Central wavelength	650nm±10nm (635nm is available on request)
Emitter type	FP-LD
Output power	5mw	10mw	20mw	30mw	40mw	50mw
Laser Range	≥5km	≥10km	≥20km	≥30km	>35km	>40km
Optical connector	2.5mm universal connector, for 1.25mm connectors, FC (Male)-LC. (Female) convertor can be provided on request
Operating model	Both CW and Pulse available
Pulse frequency	2Hz to 3Hz / 9Hz
Power supply	2AA alkaline batteries
Operating temperature	-20°C to 60°C
Storage temperature	-40°C to 85°C
Dimension	25 x 195mm
Weight	165g (without battery)

Standard Package

Model	Includes
VFL650-2S	Main unit, User Manual,Individual packing