Cable Duct Pipe Plugging Soft Sealing Suit

• Customization: Available
• Structure: Single End
• Pressure: Medium Pressure Mechanical Seals
• Model NO.: JLOFC-100
• Temperature: Temperature Mechanical Seal
• Performance: High Pressure
• Standard: Standard
• Type: Cable Pipe
• Balance: Balanced
• Cable Duct Diameter: 40mm to 300mm
• Transport Package: Carton
• Specification: 40-300MM
• Trademark: OEM
• Origin: China(Mainland)

Product Description

Inflatable type culvert sealing system
 
The culvert without the application of sealing construction will bring the humidity and stagnant water to substation basement, culvert and manual well. In such environment, the corrosions and damages to culvert tray and electrical equipment are unavoidable. The common method is the use of inflatable type culvert sealing product, to stop the water into underground culverts nearby these facilities in a simple and effective way.

Inflatable type culvert sealing system, which have been widely used in the design of underground culvert constructions in the industries of electric system, telecommunications, port, urban construction, rail transportation and so on. Provide a clean and dry operating environment to cables and other electrical equipment after installation, improve the degree of protection, and reduce the works of cleaning up sludge and stagnant water in the manual well before the maintenance works.

Simple and fast sealing

ITCS culvert sealing system is made to a sealed airbag with the flexible metal composite material, with good pressure resistance, resistance to corrosion and fire-retardant, good expansion filling effect. Both sides fitted with sealing tape, applying the movable inflation hose and automatic silicone valve. Products simply wrapped around the cable, into the pipeline. Then, connect the inflation tool and inflated, the joint of pipe wall and cable is filled tightly by products inflated expansion. The entire installation process only needs to monitor the inflation pressure, one work can complete the installation within 2-3 minutes. Even in a crowded complex environment can be simple and quickly operated. There is no any mess mixing and filling process. The pipe sealing product of each specification may cover a wide range of cable and pipe diameters.

Dismantlement with no damage
This pipe sealing systems are more likely to be removed from the pipe than other piping sealing systems. To ensure that pipes will not be damaged at the time of the cable's upgrade or replacement.
 
Strong environmental adaptability
Products can adapt to a wide range of ambient temperature changes, at the state of -15 ºC -60 ºC the airbag and the sealing material is not aging. Products can long withstand the acid and alkali corrosion in the groundwater, rain and salt fog.. Compared with other sealing methods which need the construction of dry pipe, ITCS pipe sealing system can be installed into the pipe where the water still flows, and can withstand a large water pressure.
 
Blank sealing and plural-culvert
According to different pipe diameters, ITCS pipe sealing system can seal the pipes with blank conduct and containing three or more cables. The waterproofing clip which can be inserted between cables is one of the technical methods.
 
 

 
 
 
Desired flexible sealing technology
The innovative technology of looping cable sealing is not only applicable to pipe sealing installation for new cable, but also applicable to sealing upgrade or replacement for the existing culvert. The flexible sealing technology ensures that products can withstand cables' axial tension and low-frequency vibration in a small range after installation. Form a buffer area between the pipe opening and cables, to avoid the
 
ITCS inflatable type culvert sealing system
cable shield wear which may appear movement between the cable tray. Arc-shaped surface formed by products' expansion has a certain flexibility, not susceptible to the chewing and wrecked by small animals.
The product service life test shows that the ITCS pipe sealing system can withstand 5 m water column for 20 years after correctly installed in place, these results are based on the cycle aging test results on an average ambient temperature of 25ºC.
 
Various inflatable installation tools
 
There is various inflatable tools selected and equipped for ITCS piping sealing system, we recommend two kinds of special inflating tools, all having the capacity of pressurizing the airbag to 0.3±0.02Mpa for product installation. Recommend the customers use their own prepared compressed air source.
 
Special inflating tools kits
Consist of hand held toolkits, hoses and inflatable needle, hand held toolkits are composed by gas ON / OFF switch, hose easy-plug connector and pressure monitoring meter. Standard special inflating tools kits are equipped with a portable toolbox.
  
Electric inflating tool  
Composed by hand held electric pump, hose and adapter.  
Handheld electric pump parameters
Input voltage: 15v DC
Maximum current: 5A
The maximum inflation pressure: 1.034Mpa
Accuracy: 0.24 Mpa ± 0.00689 Mpa
Control accuracy: 0.01 Mpa
Working temperature: -20 ºC ~ + 60 ºC
Weight: 480g
 
The Handheld electric pump built-in rechargeable battery, the weight of 460g,with the design of lightweight portable. The electric pump has the intelligent pressure control, will shut down automatically when the output pressure reaches the setting value, can replace the manual gas. The digital display can monitor the current working pressure value. Ten products can be installed continuously inflated only with battery, and continue to work with the connection of power adapter, or select the charging device for car cigarette lighter.
Electric inflatable tools with intelligent pressure control and digital display of pressure value, can replace ordinary installation tools, applicable to outdoor batch maintenance installation.
 
The current main products of ITCS pipe sealing system include:
Applicable to culvert's conventional series products, oversized/ micro caliber non-standard customized series products of ISO and American standard.
Combination of inflatable tools, to satisfy the special requirements for the auxiliary installation accessories.

 Product type
 

TYPE	DUCT OD(mm)	Suit 1 to 4 pcs cable
		Product size mm	cable ODmm
IDSS-40	40	120*126	23-7.5
IDSS-50	50	120*180	30-7.5
IDSS-60	60	120*230	45-7.5
IDSS-80	80	120*280	55-7.5
IDSS-90	90	120*330	60-23
IDSS-110	110	120*440	80-30
IDSS-125	125	120*450	80-30
IDSS-160	160	140*600	120-40
IDSS-180	180	140*690	140-60
IDSS-200	200	140*760	150-80
IDSS-250	250	160*940	200-120
IDSS-300	300	180*1040	250-150

*Product size can be customized according to the inner diameter of the pipe