This product is no longer promoted on Made-in-China.com. If you find any infringement or sensitive information of it, please contact us for handling. Thank you.

Outdoor Fiber Optic Cable Suppliers

Contact Supplier

Diamond Member Since 2011

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Core
Multicore
Certification
CE, ISO9001
Brand
OEM
Sheath Material
HDPE
Delivery Time
15 Days
Sample Time
7 Days
Fibers
up to 288 Cores
out Sheath Material
HDPE
Corrugated Steel Tape
Corrugated Steel Tape
Rip Cord
Two Rip Cords
Water Blocking Material
Water Swellable Jelly
Csm
Steel Wire
Operating Temperature Range
-40 to +70
Usage
Aerial Self Supporting Optical Fiber Cable
Transport Package
Packed on Fumigated Wooden Drum Suitable for Long
Specification
2KM, 3KM, 4KM, 5KM/drum
Trademark
fiberfuture
Origin
Zhejiang
HS Code
85447000
Production Capacity
4000 Kilometers Per Month

Product Description


Packaging Details:
Packed on fumigated wooden Drum suitable for long distance shipment.
Delivery Detail:Fifteen Days
Outdoor Fiber Optic Cable Suppliers
Technical Specifications for Optical Fiber Cable
1. General
1.1 This specification covers the requirements of the out door optical fiber cable to be supplied to customer for installation duct.
1.2 The optical fiber cable shall comply with the requirements of this specification and generally meet or better latest standards:
ITU-T G.650: Definitions and test methods for linear, deterministic attributes of single-mode fiber and cable ITU-T G.652.D: Characteristics of a single-mode optical fiber and cable
IEC 60793-2-50 B1.3: Sectional specification for class B single mode fibers
IEC 60794-3: Optical Fiber Cables, Part 3, Generic Specifications-Basic optical cable test procedures.
IEC 60794-3-11: Optical fiber cables - Part 3.11: Family specification for duct and direct burial outdoor optical fiber cables. 

4. Fiber and Loose Tube Color Identification
The individual fiber and loose tubes shall accordance with standard TIA/EIA-598-A and the color code as
below.
4.1 Fiber and loost tube color code
No.123456789101112
ColorBlueOrangeGreenBrownGray WhiteRedBlackYellowViloetPinkAqua
Note: fiber color in each tube according to the above table.
 
5. Mechanical and Environmental Test.
 
NOITEMTEST METHODACCEPTANCE
REQUIREMENTS
1Tensile Strength
IEC 794-1-E1
- Load: 4000N
- Length of cable under load: 50m
- Loss change £ 0.1 dB @1550 nm
- No fiber break and no sheath damage.
2Crush Test
IEC 60794-1-E3
- Load:1000 N/3000N/100mm
- Load time:  1min
- Loss change £ 0.1 dB @1550 nm
- No fiber break and no sheath damage.
3Impact Test
IEC 60794-1-E4
 
 
 
- Points of impact: 5
- Times of per point: 5
- Impact energy: 450g
- Radius of hammer head: 12.5mm
- Impact rate: 2sec/cycle
- Loss change £ 0.1 dB @1550 nm
- No fiber break and no sheath damage.
4Repeated Bending
IEC 60794-1-E6
 
 
- Bending Dia.: 20 x OD
- Load: 250N
- Flexing rate: 3sec/cycle
- No. of cycle: 30
- Loss change £ 0.1 dB @1550 nm
- No fiber break and no sheath damage.
5Torsion
IEC 60794-1-E7
 
 
 
- Length: 1m
- Load: 250N
- Twist rate: 1min/cycle
- Twist angle: ±90°
- No. of cycle: 10
- Loss change £ 0.1 dB @1550 nm
- No fiber break and no sheath damage.
6Water Penetration
IEC 60794-1-F5B
- Height of water: 1m
- Sample length: 3 m
- Time: 12 hour
- No water shall have leaked from the opposite end of cable
 
7Temperature Cycling
IEC 60794-1-F1
 
 
- Temperature step:
+20oC-40oC+70oC +20oC
- Time per each step: 12 hrs
- Number of cycle: 2
- Loss change £ 0.1 dB @1550 nm
- No fiber break and no sheath damage.
8Compound Flow
IEC 60794-1-E14
- Sample length: 30 cm
- Temp: 70°C ± 2°C
- Time: 24 hours
- No compound flow


Outdoor Fiber Optic Cable Suppliers

6. Cable Marking

Unless otherwise required the sheath will be use hot stamp marked at intervals of 1m,
containing: - Customer name - Manufacture's name - Date of manufacture - Type and number of fiber cores - Length marking - Other requirements


7. Cable Packing

The cable shall be installed on hard plywood, wooden or steel-wooden drum with order length per drum. The both ends shall be fitted with a suitable cap to prevent ingress of moisture.
any

FAQ

1.Q:Are you a factory or trading company?

---We are a factory. with ISO9001 and CE certerification

2.Q:Where is your factory located? How can I visit there?

---Our factory is located in Hangzhou City, Zhengjiang Province, China, All our clients, from home or abroad, are warmly welcome to visit us!

3.Q:Why us?

---we can help you:

The product according to your document design.

Cost Reduction

Quality Assurance

Successful Business

4.Q:What Is The Price And Payment Method Of Our Products?

---The price of our products will change according to the material of products. If you want to know the details,please contact us! We accept the payment include: T/T, D/A,  L/C

5.Q:How does your factory do regarding quality control?

---During the manufacture process, engineers and workers will stay beside the equipment, supervise the manufacture of products. All the products will go through strict inspection before they are packed and shipped to the buyers.

Send your message to this supplier

*From:
*To:
avatar Mr. Thomas
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now